For example, the walk-in hazardous materials store could be used as a workshop oil store for small containers and drums. Equipment options PE inliner for acids and alkalis (LGK 8), dissipative version available Spillguard® connect leak recognition system Our tip: SpillGuard® connect detects dangerous leaks and sends an alarm to your smartphone in real time if there is an emergency. This allows you to react immediately, gain valuable time and avoid any subsequent costs. We will be happy to discuss your individual requirements in a personal consultation. Our experts will design a customised solution with you on site. Shelving Optionally available shelves can be used to create order for small containers in your hazardous materials store. The shelves can be stacked. They have three levels (grids) and are available in two sizes: • 1,000 x 500 mm (W x D, shelf load: 75 kg*, bay load: 225 kg) • 2,000 x 500 mm (W x D, shelf load: 120 kg*, bay load: 360 kg) *Shelf loads are with an evenly distributed load. Storage area approx. 2–15 m² Storage recommendations In addition, the following specifications must be observed when storing flammable media: 3 Create equipotential bonding (earthing) (connection point provided in the hazardous materials store) 3 If required, provide lightning protection 3 Country-specific requirements for air exchange rate 3 Specifications in accordance with ATEX Directive 2014/34/EU and 1999/92/EC 3 For hazardous materials stores without fire-resistant partitions, a distance to fire loads must be observed (usually at least 10 m) 427
RkJQdWJsaXNoZXIy NzIzNDY=