Use walk-in hazardous materials store MCV to store water-based paints in small containers and drums for example, as well as fill them or dispense from them. As these substances are temperature-sensitive, the store is also equipped with thermal insulation and heating. Various sizes of container can be stored, from small containers up to 205 litre drums. The inner room can be optimised with flexible shelving systems. Equipment options Infoboard for the clear presentation of information and work safety instructions The 5 kW heating system in nEx design, in combination with the thermal insulation, ensures an internal temperature of + 5 °C for an external temperature of -15 °C Whether you need a heating system or you store so many different substances that a clearly laid out information board makes sense, we will clarify this together with you in a personal consultation. Our experts will design a customised solution with you on site. Shelving Optionally available shelves can be used to create order for small containers in your hazardous materials store. The shelves can be stacked. They have three levels (grids) and are available in two sizes: • 1.000 x 500 mm (W x D, shelf load: 75 kg*, bay load: 225 kg) • 2,000 x 500 mm (W x D, shelf load: 120 kg*, bay load: 360 kg) *Shelf loads are with an evenly distributed load. Storage area approx. ca. 5–17 m² Storage recommendations In addition, the following specifications must be observed when storing flammable media: 3 Create equipotential bonding (earthing) (connection point provided in the hazardous materials store) 3 If required, provide lightning protection 3 Country-specific requirements for air exchange rate 3 Specifications in accordance with ATEX Directive 2014/34/EU and 1999/92/EC 3 For hazardous materials stores without fire-resistant partitions, a distance to fire loads must be observed (usually at least 10 m) 425
RkJQdWJsaXNoZXIy NzIzNDY=