Fire-rated storage container RFP SD Fire-rated storage container RFP SD with sliding doors offers fire protection for large quantities of hazardous substances, stored in drums or IBCs. The larger size of the sliding doors gives you up to 50 % more storage capacity than the wing door variant. In addition, the door opening radius is eliminated, which extends the working area in front of the room system. When installed outdoors, there is therefore no risk of the doors slamming shut unintentionally due to wind loads. In the version with electric sliding doors RFP SD-ED, the doors can be easily opened and closed by remote control from the forklift. RFP 815.30 SD 3 Best option when larger quantities of hazardous materials need to be stored in a separate fire compartment and no clearance is available 3 The larger sliding doors offer up to 50 % more storage capacity 3 An open sliding door gives easier access to the fire-rated storage container with shelving than a wing door and improves logistical efficiency; when installed outdoors, there is no risk of the doors slamming shut unintentionally due to wind loads 3 The manually or electrically operated fire-rated doors, tested according to EN 16034, close automatically when the fire detectors are triggered 3 Install directly next to the external wall of neighbouring buildings or as a fire-rated separate area, e.g. in a production hall Exception: peroxide stores 3 On request available with variable shelf heights 3 Water law tested, two piece, hot dip galvanised 5 mm spill pallet in the lower storage level, with removable grids (max. load capacity: 1250 kg/m²) 3 Long-lasting corrosion protection with fully-galvanised base material and high-quality 2K paint (RAL 9002, grey-white) 3 Fire protection panels with high insulation properties (thickness 100 mm, A class material, non-combustible) 3 ETA approval / CE marking according to European Regulation (EU) No. 305/2011 3 Tested and approved as a complete system with 120 minute fire protection (F 120 / REI 120) from inside and outside Product description Structural analysis The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to DIN 4149, EN 1998-1:2004. Available with additional equipment for up to wind load zone 4, terrain category I (qk,w= 1.064 kN/m²) and for up to ground snow load sk = 5.86 kN/m². Hazmat stores | with fire protection 416 ETA APPROVED EFECTIS REI 120
RkJQdWJsaXNoZXIy NzIzNDY=