Is it permissible to carry out filling or decanting activities in a safety storage cabinet? Generally no. Fume cupboards or workplaces for hazardous substances should preferably be used for this purpose. Deviations from the general prohibition can only be made if it has been demonstrated in the risk assessment that no hazards arise, e.g. when handling normal laboratory quantities. Which approval documents and certificates should be available from the manufacturer of a safety storage cabinet? To ensure high quality and funcionality in a worst case scenario a safety storage cabinet that conforms to the standards should have the following approval documents: ››› Fire test report from an independent materials testing institute as proof of fire resistance ››› GS certificate as proof of compliance with ProdSG §21 Para. 1 on the basis of ZLS EK5/AK4 and proof of conformity in accordance with EN 16121 and EN 16122 (requirements and test procedures for safety, strength, durability and stability) ››› EC declaration of conformity as proof of compliance with product-relevant EU directives and national standards © asecos GmbH MANUFACTURER’S DECLARATION Product Conformity EN 16121 and EN 16122 We asecos GmbH Sicherheit und Umweltschutz Weiherfeldsiedlung 16-18 D-63584 Gründau Hereby declare that the products below Description Safety Storage Cabinets Test Standard DIN EN 14470-1:2004-07 Type Classification Type 90 and Type 30 Production Site asecos GmbH Sicherheit und Umweltschutz Weiherfeldsiedlung 16-18 D-63584 Gründau Model-Line Q-LINE Model-Group Q-CLASSIC-90 / Q-PEGASUS-90 / Q-PHOENIX-90 Q-CLASSIC-30 / Q-DISPLAY-30 are additionally tested, manufactured and placed on the market in accordance with the requirements of the following standards: EN 16121:2013+A1:2017 Non-domestic storage furniture – Requirements for safety, strength, durability and stability; German version DIN EN 16121:2017-12 EN 16122:2012 Domestic and non-domestic storage furniture – Test methods for the determination of strength, durability and stability; German version DIN EN 16122:2012 All cabinet models, including related interior equipment, of model lines / model groups mentioned in this manufacturer's declaration, meet the requirements of the highest test level 2 according to EN 16121 and EN 16122. Place / date of issue Gründau, 06.2020 Michael Schrems i.V. Sven Sievers Managing partner Head of division Product Management & Product Development EC DECLARATION OF CONFORMITY in terms of the EC Machinery Directive 2006/42/EC, appendix II A We hereby declare that the products referred to below Description Safety storage cabinets model line Q-LINE are developed, manufactured and placed on the market in accordance with the guidelines below: 2006/42/EG 2014/34/EU Applied harmonised standards and regulations, in particular: EN ISO 12100:2010 Other applied European or national standards, rules and regulations, in particular: DIN EN 14470-1:2004 Labelling/Documentation Labelling `II 2 G Ex h IIB T6 Gb Technical documentation Deposited at the manufacturer Manual Enclosed to the device Norbert Holscher Date and place of issue Gründau, 12.2022 Michael Schrems Managing partner Q90.195.060; Q90.195.090; Q90.195.120; Q90.195.120.MV; Q90.195.120.MM; Q90.195.060.FU.WDAS; Q90.195.090.FU.WDAS; Q90.195.120.FU.WDAS; Q90.195.060.WDC; Q90.195.120.WDC; Q90.195.120.MV.WDC; Q15.195.056; Q15.195.116; Q30.195.056; Q30.195.086.WD; Q30.195.116; Q30.195.056.FU.WDAS; Q30.195.086.FU.WDAS; Q30.195.116.FU.WDAS; Q30.195.086.WDFW Fire safety storage cabinets - Part 1: safety storage cabines for flammable liquids DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast) asecos GmbH asecos GmbH Weiherfeldsiedlung 16-18 D-63584 Gründau Safety of machinery - General principles for design - Risk assessment and risk reduction Authorised representative for documentation EC DECLARATION OF CONFORMITY 1/1 FM Approvals 1151 Boston-Providence Turnpike PO Box 9102 Norwood, MA 02062 Page 1 of 5 Not to be distributed outside of FM Approvals and its affiliates except by Customer APPROVAL REPORT Project No: 3053853 Supplements Project No.: None Class: 6050 Product Name: Wooden and wood/gypsum/metal construction safety cabinets per FM Standard 6050 Product Type: Storage Safety Cabinets Name of Listing Company: asecos GmbH Sicherheit und Umweltschutz Address of Listing Company: Weiherfeldsiedlung 16-18 Gründau D-63584 Germany Customer ID: 147898-1 Customer website: http://www.asecos.com Prepared by Reviewed by Joseph Nunes Advanced Engineer Leonard D'Angelo Technical Team Manager, Materials Cynthia E. Frank AVP, Manager of Materials 6/26/2015 Date of Approval It Can Happen To Anyone – many different dangers threaten when handling hazardous materials! The use of hazardous and combustible materials is part of the daily routine in most laboratories and industries and is unavoidable. What is often quickly forgotten in daily handling: the improper storage of such materials puts people, the environment and property in danger. Learn more about the safe storage of hazardous materials in our „HazMat Guide“. You can order it on our website: www.asecos.co.uk/catalogues Please observe local legislation and regulations. 32 Flammables
RkJQdWJsaXNoZXIy NzIzNDY=