Ready for use in seconds Set in place, switch on, ready to go! Installing the SpillGuard® is simple push Place the SpillGuard® at the lowest point in the tray shelf Press and hold the Power button until you hear 1 beep After 30 seconds, the red LED will flash and you will hear 2 beeps to indicate that initialisation is complete Reliable monitoring during ongoing operation The red LED flashes (1x per minute) to signal that the device is ready for operation Acoustic and visual alarms are triggered in case of contact with liquid hazardous materials Good to know: the leak warning is guaranteed to remain active for 24 hours Technical specifications Exterior diameter (mm): 110 Exterior height (mm): 40 ATEX marking: EX II 1G Ex ia IIB T4 Ga Q-LINE UB-LINE Hazardous material depots Sump pallet S-LINE SpillGuard® hazardous materials leakage warning system – Range of applications
RkJQdWJsaXNoZXIy NzIzNDY=